Home Wind Turbine Hurricane Cat 5 Low Wind

Home Wind Turbine Hurricane Cat 5 Low Wind

Price: $749.99
Retail: $999.99
You Save: $250.00

Brief Description

Detailed Description

Specifications

Residential Wind Turbine Hurricane Cat 5 Low Wind

Wind Generator Complete Kit Hurricane Cat 5 this kit includes the Cat 5 Generator with mounting bracket with graphics as shown and our Storm Rotation Blades .This is the culmination of gathering the finest components available to assemble a world class wind generator made in the USA. See the detailed description for all the specs and information

Wind Generator Kit Hurricane Cat 5 Low Wind

The Category 5 Hurricane is like having 2 generators in 1 case.

It has 2x the voltage output of the Cat 4

Designed for areas of the World with extremely light wind speed

Hand made in the USA

Patent Pending Dual Power Output Generator

3 charging options

Perfect for wind, hydro and marine applications

Produces power in very light wind

Comes pre-wired with 2 power cords

Includes 2 ac-dc rectifiers

Produces 12 volts at just 40-50 rpm, 24 volts at 80-100 rpm

Robust bearings and housing

Will last many years in harsh environments No internal parts or brushes to maintain Full 90 day replacement warrant

Full description:
The Hurricane cat 5 wind generator starts charging your battery bank at just 40-50 RPM! This PMA is like having 2 generators in 1 case It contains two of our specially wound high voltage stators and two N-42 high grade magnetic rotors.

The Hurricane Cat 5 is the most efficient generator ever built for extracting energy from very light wind. Because the Cat 5 uses a dual output system, you have 3 options to choose from. You can charge 2 independent systems, double the output voltage with series wiring, or combine the current for maximum amps.

Hurricane stators are of higher Quality

100 RPM- 32 v. x .50 amp = 16 watt

200 RPM- 72 v. x 1 amp = 72 watt

300 RPM- 96 v. x 1.5 amp = 144 watt

400 RPM- 110 v. x 2 amp = 220 watt

500 RPM- 136 v. x 2.5 amp = 340 watt

600 RPM- 156 v. x 3 amp = 468 watt

700 RPM- 178 v. x 3.5 amp = 623 watt

800 RPM- 194 v. x 4 amp = 776 watt

900 RPM- 220 v. x 4.5 amp = 990 watt

1000 RPM- 242 v. x 5 amp = 1210 watt

1100 RPM- 268 v. x 5.5 amp = 1474 watt

1200 RPM- 284 v. x 6 amp = 1707 watt

1300 RPM- 318 v. x 6.5 amp = 2067 watt

1400 RPM- 332 v. x 7 amp = 2324 watt

Only NEW PARTS are used including bearings, rotor shafts, stator cores, pole shoes, generator housings and the most powerful magnets on earth. Our employees are skilled members of the prestigious E.A.S.A. The Electrical Apparatus Service Association contains the best engineers, draftsmen, winders, machinists, electricians and repair personnel in the world! Designed for years of trouble free service

The Blades

Perhaps the most important decision in building a wind generator is the blades.
Our blades make more power.....
Choosing a adequate rotor is imperative. In today's marketing game guys will say anything to try and gain an edge on the competitor. We will simply appeal to your common sense.

Our generator blades are perfect for Hurricane wind Generator and when using our blades we guarantee stated outputs. The size of the rotor is crucial.....it takes power to make power. We have the lowest cut in speed of any generator we know of in the industry and therefore do fine with the larger rotor. We would not recommend it for many of the fledgling wind companies on the market who have to use small blades and rely on high wind to reach cut in speed. Our rotors are designed to charge 12 volt battery banks in as low as 4 mph winds. The Galvanized Steel will provide service long after the plastic blades have withered away and aluminum has stress cracked.......ie three little pigs school of engineering.

Why 3 Blades?
Have you ever looked at commercial Wind Turbines?
How many blades do they have? 2,5,6,9,12?

No they have 3
This is because a lot of companies with a lot of engineers decided this was a good number.....to many blades creates turbulence and slows down the rotation and is inefficient.
The only reason to make a rotor with a lot of blades is simple.....if you have one type of blades and 3 will not turn you rotor you guessed it you have to add more....
Also we will not be adding a nifty video of our blades on the back of a truck......That is because our blades were tested in a Wind Tunnel

Research TSR TIP Speed Ratio and SEE how high blade count is like running into a wall

All mounting Hardware included Hubs available in 17mm or 1/2 Cat 5 takes 1/2 17 mm for Cat 3 and 4

The Mount -Body-Vane

No expense was spared in designing our mounts and constructing them. These mount slid over a standard schedule 80 pipe with an OD of 1 7/8. These mounts are constructed by Twists and Turns Furniture in Roanoke VA known for their craftsmanship. Each mount comes with the graphics and all hardware necessary to get you up and going and keep this world class generator pointed in the wind. The assembley sits on a split collar and rides on a PCV bearing to reduce metal on metal friction. All mounts are powder coated for a finish that will last for years to come and welded as one peice
providing strength unlike many other companies on the market who have bolt together mounts that will not last over time.

Resources

Home Wind Turbine Hurricane Cat 5 Low Wind

Residential Wind Turbine Hurricane Cat 5 Low Wind

Wind Generator Kit Hurricane Cat 5 Low Wind