Hurricane Vector™ Grid Tied Wind Turbine Kit
Hurricane Wind Power : Be the Master of your Craft
Listing for Wind Turbine Kit Pictured Only (wire and pole are not included)
Includes 1000W MPPT Grid Tie Inverter DC 22V to 60V to AC 110V
Disclaimer: This is NOT UL1741 Approved
It is up to you to check all state, local and federal laws codes, electrical company policies and insurance regulation prior to commissioning an non UL certified system. We do not accept return and or pay shipping cost for consumer failing to due due diligence to determine if this unit is acceptable for use in your area with electrical companies, code enforcement and or home owners insurance. The grid tie are equipped with anti islanding protection which is the part of the inverter which keeps the inverter for putting power back into the grid in a power outage which is needed with this type of system.
Hurricane recommends staying with the UL certified listed inverters that are heavier and have much greater capabilities for those looking for a serious systems to meet long term power usage on their homes. We do however recognize those who are hobbyists that wish to experiment with wind power and this is a great package for that. We at Hurricane have been testing thhis one for some time with good results
Unlike many vendors in the small wind business. We use real wind buck boost MPPT technology to make more power over time than any leading wind turbine manufacturer for the money.
We have listed this turbine by itself as some of the consumer are doing direct grid tie applications with lower voltage start-ups for which buying the turbine without it's controller is appropriate. As always if you have questions see our technical support line for questions or contact us through eBay messages if you do not know if the product is right for you.
Greeting folks Tony from Hurricane Wind Power here. Let me start out by saying we have put a lot of work into our new wind turbines. We have some of the best pound for pound machines in small wind period!
The 48 Volt Hurricane Vector is our professional grade wind turbine that is as easy to mount and use so that the beginner can achieve impressive results in power production that even those experienced in wind power will be envious of. The Hurricane XP 48 volt residential wind turbine is perfect for both home on and off grid use. Do not be fooled by those that make ridiculous claims regarding power production. The Hurricane XP will exceed the power output of wind turbine from other companies with wind turbines rated up to and exceeding to 2kw and more.
The Hurricane Vector features the following:
- Skewed stator core 3 times the size of of our competitors
- Properly designed rotor made for wind power
- Dynamic blade braking provides secondary braking method for wind turbine in high speed wind gusts
- 40 inch blades and 88 inch blade diameter provide the torque necessary for real power production
- 1000 watt of continuous power in an National Research Energy Laboratory rated 24.6 MPH
- Instantaneous power output up to 1500 watts
- Hurricane 2 year warranty
- White Lightning 48V wind generator
- Stealth Storm 40 inch wind turbine blade set (5 blades)
- Hub and nose cone
- Vector 2.0 wind turbine body with tail fins
- Hardware to mount generator and tail fins to body
- Locking collar
- Yaw bearing
- Slip ring 6 wire
- Grid Tie Inverter
Why buy from Hurricane?
Hurricane Stealth Storm Wind Turbine Blades
Hurricane wind power is making our wind turbine blades available that we use on our XP and Vector wind Turbines. We have had good luck with these blade which feature one major advantage over our competitors....
It called Dynamic blade braking:
Hurricane Stealth Storm Wind Turbine Blades utilize their airfoil as a method of breaking eliminating the need for furling and the associated wear that comes with the turbine being violently moved about in high winds which contribute both to bearing wear, blade tension and many other undesirable forces acting on small wind turbines in high speed wind operation.
Hurricane Stealth Storm Wind Turbine Blades utilize asymmetrical and twisted aerodynamic design which ensures rotor capture maximum power from wind (Cp>0.32 in low wind) and operates in amazingly low noise and minimal vibration.
Large ratio of tip section chord to root section chord and variable chord airfoil blade ensures rotor start-up easily and running smoothly with high torque & RPM at low wind conditions Aerodynamic blades designed with over-speed dynamic blade braking systems ensure the generator is well protected in higher winds.
Reinforced nylon glass-fiber using advanced thermoplastic engineering and precision injection molding technology for higher strength, flexibility and reliability .Cp.>0.32 at low wind.
Typical wind turbines have three moving parts The generator head, yawing and mechanical furling body parts, Hurricane replaced mechanical furling by using advanced electromagnetic and Dynamic blade braking which only take two moving parts, this in turn improves generator reliability significantly as it is subject to less mechanical failure and bearing wear from stress and impact.
Smart Stealth Blade Aerodynamics Braking and Electromagnetic Speed Limitation
Abandoned the traditional failure-prone mechanical furling system, the blade itself is designed with over-speed braking system which will generate a reverse reluctant torque to lower the blade rotation speed so that the blades and generator can be well protected in higher wind, it solved safety and reliability problems facing by
most small wind turbines. Combination of Electromagnetic braking and aerodynamic braking maximizes energy capture by extending turbine’s operating speed range into higher and lower wind speed which are missed by the old style wind turbines
As with all things that have with moving parts there will be some noise and vibration, and wind turbines are no exception, most noise and vibration are caused by turbine blades rotation in the wind and generator resonating with the rotor and tower, and generator bearings Hurricane stealth blades are well designed and work quietly in both low and high wind.
The blades have exceptional consistency and aerodynamic outline with a mass distribution which ensures the rotor/ blade set operates with minimal vibration and very low noise. Perfectly matched to the Hurricane White Lightening XP and Vector wind generators the blade cause much less resonance of the wind turbine and tower.
Blade Aerodynamics Braking limits blade to rotate at the rated RPM which could avoid higher noise and vibration caused by extreme wind. Wind turbine with minimal vibration and low noise can be mounted on rooftop safely and its operation won’t affect the resident.
Grid Tie Inverter
Wind power grid tie inverter 1000W with LCD & dump load resistor, 22-60V DC to 110V AC MPPT Pure Sine Wave Grid Tie Power Inverter with built-in rectifier for AC wind turbine generator grid tie systems.
The unit has an integrated rectifier inside the inverter, the inverter can directly connect to the three phase wind turbine with no need to connect AC to DC controller between the wind turbine and the inverter.
- Input voltage range: 22-60vdc (test point is at the output of the internal rectifier)
- Max input DC voltage: 60V
- Peak power tracking voltage: 25-60V
- Max output power: 1000W
- Nominal voltage: 110vac
- Nominal voltage range: 95-140V
- Frequency range: 47.5-51-5 for 50hz
- Power factor: >0.95
- Output waveform: Pure Sine Wave
- MPPT efficiency: 99%
- Overcurrent protection: Yes
- Over temperature protection: Yes
- Reverse polarity protection: Yes
- Anti-island protection: Yes
- Stackable:Just for AC output
- Operating temperature range: -20 0C - +50 0C
- Inverter inside temperature: -20 0C - +85 0C
- Current THD: <5%
- Voltage THD: <5%
- Standard: UL 1741,IEEE1547, VDE4105 (No Certificate)
- Cooling: Fans
- Peak inverter efficiency: >92%
- Warranty: 2 years
- 1 x Grid Tie Inverter
- 1 x Power Cable
- 1 x Dump Load Resistor w/Cables and Bracket