Product Description
IronRidge
Ballasted Roof Mount
Module Clamps
The Module Clamp secures PV modules to the Ballast Tray Mounting Plates and arrives at the job site preassembled. The Module Clamp is sized for the specific module thickness. Our IronRidge clamps are independent upon the module?s mounting holes and attached to the edge of the module frame. Includes Hardware and WEEB grounding clip. See table below to determine the correct clamp size.
The three primary components of the IronRidge Ballast system are: the Ballast Tray, Wind Deflectors, and Module Clamps - all dependent on the size of your array, and modules used. Rubber roof pads, microinverter brackets, wire management options, and seismic anchors are also available. To determine exactly which components you need, call one of our Technical Sales reps, or click here to use the Ironridge Sizing Tool.
| Module Thickness | Clamp Info | ||
| Mm | Inches | Model | Part Numbers |
| 30.5 - 31.4 | 1.20 - 1.23 | BRM-MCL-31 | TWOBRM-MCL-31 |
| 31.5 - 32.4 | 1.24 - 1.27 | BRM-MCL-32 | TWOBRM-MCL-32 |
| 32.5 - 33.4 | 1.28 - 1.31 | BRM-MCL-33 | TWOBRM-MCL-33 |
| 33.5 - 34.4 | 1.32 - 1.35 | BRM-MCL-34 | TWOBRM-MCL-34 |
| 34.5 - 35.4 | 1.36 - 1.39 | BRM-MCL-35 | TWOBRM-MCL-35 |
| 35.5 - 36.4 | 1.40 - 1.43 | BRM-MCL-36 | TWOBRM-MCL-36 |
| 36.5 - 37.4 | 1.44 - 1.47 | BRM-MCL-37 | TWOBRM-MCL
Product VideosCustom FieldProduct ReviewsYou May Also Like...
Recommended
You May Also Like...
Recommended
|