Air-Boss 1400 V Series PMA
Direct drive permanent magnet alternators for direct drive wind turbines.
The useful range of Air-Boss permanent magnet alternators (PMA) overcomes several barriers typically found in wind turbine generators, small wind turbines, and windmill alternators. Barriers such as cut in/cut out speeds, useful voltage ranges, and power to weight ratios have been overcome with the Air-Boss PMA. Small wind turbine designers, experimenters, home owners, and alternative energy enthusiast can all benefit from the versatile design and performance characteristics of the Air-Boss 1400 series PMA. Using direct drives and advanced composite materials the Air-Boss PMA delivers efficient power, without gear boxes, with a high power to weight ratio.
The ranges of the Air-Boss permanent magnet alternators are available in six different models in both single and dual stator designs. The Air-Boss PMA stator design incorporates proprietary designs that virtually illuminate all cogging typically found in other windmill alternators, small wind turbines, and wind turbine generators.
Standard designs ranges:
.5KW (500 watts) to 2.6KW (2650watts)
Voltages up to 580 volts
No gearing such as speed multipliers
Standardized sub-assemblies for field replacement and "Do it yourself" (DIY)
High power-to-weight ratio (approximately 60 watts per pound)
Simplication of mechanical design
Easy mechanical interface
Custom designs available
Additional Air-Boss 1400 PMA Dimensions: The four Turbine support bolts are stainless steel ½” X 13tpi on a 4.00” bolt center diameter.The three stator support bolts are stainless steel ½” X 13tpi on a 12.00” bolt center diameter.The three brass (L1, L2, L3) stator output electrical connection studs are ¼” X 20tpi with 7/16” nuts. The top rotor center hole clearance is 3.125”.
Available in the Following Models:
Air-Boss 1400-24V PMA
Air-Boss 1400-48V PMA
Air-Boss 1400-96V PMA
Air-Boss 1400-24XP PMA
Air-Boss 1400-48XP PMA
Air-Boss 1400-96XP PMA
Full performance charts of all models